Editorial Policy
Last updated: November 21, 2026
This page explains how HardHatCalc pages are written, sourced, checked, dated, and corrected. It also says who owns the site and where advertising fits.
How Pages Are Written
All content on HardHatCalc is written and maintained by Dan Dadovic, Commercial Director at Ezoic Inc. & PhD Candidate in Information Sciences. Content creation is AI-assisted (AI tools help with drafting and research), but every piece is reviewed, edited, and verified by Dan before publication.
Dan moved to Northumberland, UK, in 2017. In 2025 he moved into his current house and started the renovations and upgrades himself. That work covers room expansion, structural work, roofing, painting, insulation, and the garden. It supplies the first-hand notes on these pages, and technical research supplies the rest. His background and the renovation story are on the author page.
Where Formulas and Figures Come From
Most formulas come from published codes and standards. These include the International Residential Code (IRC 2021), ACI 318 and ACI 347R for concrete, and the American Wood Council span tables. Others come from ASTM standards, TPI 1 for trusses, and the Brick Industry Association Technical Notes. Masonry walls follow CMHA (formerly NCMA) technical notes, and drywall follows Gypsum Association guides GA-214 and GA-216. Insulation targets follow IECC 2021, and the masonry wall R-value calculation follows the ASHRAE Fundamentals Handbook method.
Product figures come from the makers' printed data sheets and installation guides. Shingle bundle coverage follows Owens Corning, CertainTeed, and IKO data sheets, and paint coverage follows Sherwin-Williams and Benjamin Moore specifications. LVL beam sizing uses a Weyerhaeuser technical bulletin, and window rough openings follow Andersen and Marvin installation guides.
Some figures are this site's own estimating defaults, based on typical trade practice rather than a published table, and the source records say so. Cost figures are US national averages with dates and ranges, not quotes from a supplier. Each calculator page shows the formula it uses, so you can check the math yourself.
For example, the deck joist span tool works from IRC Table R507.6, and the brick quantity calculator uses Brick Industry Association Technical Notes 10. For background on insulation targets, read the guide to insulation R-values.
How the Methodology Review Works
Two academic civil engineers review the calculation methodology, each in their own subject area. Doc. dr. sc. Bojan Milovanović, dipl. ing. građ. covers building physics, thermal insulation, envelope materials, fire, moisture, and acoustics. Doc. dr. sc. Mladenka Juradin, dipl. ing. građ. covers every structural calculator, plus concrete, aggregates, masonry, finish materials, coatings, welding, underground drainage structures, and general take-offs.
Their sign-off is a standing arrangement that covers the methodology and formula base in each subject area. It is not a dated, page-by-page sign-off. Each calculator and guide names its reviewer under the title, after the words "Methodology reviewed by". A few pages fit neither area cleanly, so Dan assigned each of them to the closer fit. The review is not engineering advice for any specific project. Credentials, affiliations, and the topic split are on the reviewer profiles page.
Accuracy and Limits
Every result on HardHatCalc is an estimate for planning, not a design. The structural tools use simplified engineering formulas and leave out local loads, soil conditions, and connection details. A licensed structural engineer should check any load-bearing or foundation work before you build. Local building codes take precedence over any calculator output. Material and cost results also vary with region, supplier, grade, and season. The limits of each calculator type are set out in full on a separate page.
Dates, Updates, and Corrections
Each calculator and guide shows a Last updated date. That date moves only when the page's own content changes, and the sitemap carries the same date. A change to layout shared by every page, such as the footer, does not move it. This page shows its own date at the top.
To report an error, use the contact form, which the Feedback button on every page also opens. Once a calculator shows a result, a "Report an issue with this result" form appears below it. Dan reads each report. When a report shows a real error, he corrects the page and its date moves.
Ownership and Advertising
HardHatCalc is independently owned and run by Dan Dadovic. No ads run on the site today. When ads are switched on, they may come from Ezoic, where Dan works as Commercial Director. When ads run, the ad provider chooses and serves them. Ads never change what a calculator computes or what a page says.